Why is my electric blanket not working?
As with most electronics, electric blankets can “die out of the blue”. After all, just one faulty wire can make it so that the entire blanket no longer heats up. And figuring out exactly what went wrong in the circuit board or the heating element can be a bit complicated.
So, we’re going to stick to the basics. In other words, if your electric blanket no longer works, here are the first things we’d suggest checking out before chucking it into a bin.
Check the controller of the electric blanket
Whether it’s a heated blanket or a heated throw, the controller is the first part of the actual blanket that you want to check out. After all, it’s the “command centre” of the entire blanket and is usually the thing that gets damaged.
So, check whether there are any loose connections or damaged wires going in and out of the controller. You can also try to take the controller off and check for any visible damage that way. And if it has dual control, check both controllers individually.
Play around with the settings
If you’re electric blanket suddenly stops working, it could be a good idea to play around with the setting a bit before ruling that it’s out of commission. This is because many electric blankets have features that will turn the heating off for a bit.
For example, a lot of modern electric blankets have overheat protection. This means that it simply got too hot and needs to cool off a bit before you can use it again. It could also be a blown-out thermal fuse.
And some electric blankets have an automatic timer that might have gone off at some point. So, unplug the electric blanket, leave it out for 20-30 minutes, plug it back in and try out different temperatures and heat settings. Maybe it just has a slow start.
Why is my Silentnight electric blanket not working?
Recently, we’ve also been asked about the Silentnight electric blanket in particular. And while we’re sure there are more popular heated blankets on the market, we wanted to address this one specifically to help our Advisee out.
Generally, the Silentnight electric blanket is pretty standard in terms of its construction. AKA we suggest going through the troubleshooting process we described in the previous section. And take note that the Silentnight electric blanket does have overheat protection. So, give it a bit of time.
How long does it take for an electric blanket to heat up?
During cold winter nights, you probably don’t have a lot of patience and want your new blanket to be nice and toasty right away. However, modern electric blankets are made to prevent overheating, both your and the wires, so it usually takes them a bit of time.
From what we could find, most electric blankets need at least 30 minutes to get nice and toasty. Maybe a bit more or less depending on how warm they can get. But generally, don’t expect 40-degree heating after just a few minutes.
Can you use an electric blanket upside down?
This depends from one model to another. If there’s a clearly labelled “up side”, then it’s safe to assume that the electric blanket has to be used in that way.
However, if the electric blanket is identical on both sides and there are no instructions in the care manual about it, the blanket is likely two-faced and can be used both ways.
Can you drape the electric blanket over yourself?
Sometimes labels are very important. If what you have is an electric blanket, then it shouldn’t be draped over you. Electric blankets should be strapped to your mattress or mattress topper, underneath the bottom sheet.
However, if it’s an electric throw, then it can be draped over you.
While it might be difficult to distinguish the two, read the care guide carefully and you should find the information there. Also, if the blanket has straps, it’s almost certainly an electric blanket and not a throw.
How to store an electric blanket?
Since an electric blanket has wires and a heating element, you need to be careful how you store it. Generally, there isn’t one ideal way to go about it, so it’s best to read the care manual. For the Silentnight electric blankets, for example, they suggest carefully rolling up the blankets and then putting them away.
This is because folding the blanket could put more tension on the wires, leading them to fray and get damaged.
Also, this should go without saying, place the electric blanket somewhere completely dry and where they can’t be reached by pets or toddlers – or anything else that likes to nibble.
Why is my electric blanket not heating up?
If more than 30 minutes have passed and the electric blanket is still completely cold, check the outlet. If it’s also functional, some of the wires have likely been damaged.
Conclusion
All in all, if your electric blanket is not working as it should, don’t panic. Check the outlet, the wires, the cord, and the controller. If there’s no visible damage, you can try getting into the controller itself if you have the skills to handle electronics.
Otherwise, call a professional or see if the brand can replace your old electric blanket with a new one.